Needle Point Bipolar Ionization
GPS’ NPBI technology works to safely clean the air inside commercial and residential buildings. The patented technology uses an electronic charge to create a plasma field filled with a high concentration of + and - ions. As these ions travel with the air stream they attach to particles, pathogens and gases. The ions help to agglomerate fine sub-micron particles, making them filterable. The ions kill pathogens by robbing them of life-sustaining hydrogen. The ions breakdown harmful VOCs with an Electron Volt Potential under twelve (eV<12) into harmless compounds like O2, CO2, N2, and H2O. The ions produced travel within the air stream into the occupied spaces, cleaning the air everywhere the ions travel, even in spaces unseen.
Disclamers:
Global Plasma Solutions (GPS) uses multiple data points to formulate performance validation statements. GPS technology is used in a wide range of applications across diverse environmental conditions. Since locations will vary, clients should evaluate their individual application and environmental conditions when making an assessment regarding the technology’s potential benefits.
The use of this technology is not intended to take the place of reasonable precautions to prevent the transmission of pathogens. It is important to comply with all applicable public health laws and guidelines issued by federal, state, and local governments and health authorities as well as official guidance published by the Centers for Disease Control and Prevention (CDC) (https://www.cdc.gov/coronavirus/2019-ncov/prevent-getting-sick/prevention.html), including but not limited to social distancing, hand hygiene, cough etiquette, and the use of face masks
Global Plasma Solutions Products
Particle Reduction
The GPS NPBI technology reduces airborne particles (i.e., dust, pet dander, pollen) through agglomeration. The ions attach to the airborne particles. The particles are subsequently attracted to one another, effectively increasing their mass and size. The air filtration system easily captures the larger particles, increasing the capture efficiency of your HVAC system.
Odor Reduction
During the GPS cleaning process chemical, pet, cooking, and other odors are broken down into basic harmless compounds, leaving the indoor air fresh smelling and free of odor causing VOCs.
Pathogen Reduction
During the GPS cleaning process the NPBI technology attacks and kills viruses, mold spores and bacteria. The ions steal away hydrogen from the pathogens, leaving them to die, and leaving you with clean and healthy indoor air.
Energy Saving
GPS’ environmentally friendly cleaning process allows commercial buildings to significantly reduce the amount of outdoor air required to operate. This equates to a safer, more comfortable environment that requires up to 30% less energy to condition.
GPS-FC48-AC™
Auto-cleaning, lightweight NPBI systems that handles up to 4,800 CFM or 12 tons. Designed for multiple mounting options including fan inlet, interior duct walls or floors. The composite construction allows for mounting in corrosive environments.
GPS-FC24-AC™
Auto-cleaning, lightweight NPBI system that handles up to 2,400 CFM of 6 tons. Designed for multiple mounting options including fan inlet, interior duct walls or floors. The composite construction allows for mounting in corrosive environments.
GPS-DM48-AC™
The world’s first auto-cleaning, lightweight duct-mounted NPBI electronic air cleaner. The maintenance free unit is designed for indoor or outdoor duct mounting and can handle up to 4,800 CFM or 12 tons.
Engineering Air for a Cleaner World™
GPS’ NPBI technology works to safely clean the air inside commercial and residential buildings. The patented technology uses an electronic charge to create a plasma field filled with a high concentration of + and - ions. As these ions travel with the air stream they attach to particles, pathogens and gases. The ions help to agglomerate fine sub-micron particles, making them filterable. The ions kill pathogens by robbing them of life-sustaining hydrogen. The ions breakdown harmful VOCs with an Electron Volt Potential under twelve (eV<12) into harmless compounds like O2, CO2, N2, and H2O. The ions produced travel within the air stream into the occupied spaces, cleaning the air everywhere the ions travel, even in spaces unseen.
GPS-FC-3-BAS™
NPBI Air Purification Device
The GPS-FC-3-BAS™ unit is designed to be mounted inside of fan coils, heat pumps, PTACs, ductless mini-splits and air handlers up to 3,200 CFM or 8 tons. It’s compact size and simple mounting requirement allows it to be mounted almost anywhere in just a few minutes.
GPS-iMOD®
Modular Ionization Air Purification Device
The GPS-iMOD is a modular NPBI system that is field assembled to any length up to 240 inches in 6-inch increments. The composite and carbon fiber GPS-iMOD can be mounted in corrosive environments and handles 50-250 CFM per inch of bar.
Features:
- > 140M ions/cc/sec per inch of bar
- Universal Voltage Selector Switch
- Six HV Output Ports
- Alarm Contacts
- Illuminated On/Off Switch
- Plasma on Indication Light
- UL 2998 Ozone Free
GPS-FC24-AC™
Auto-Cleaning Ionization System
Auto-cleaning, lightweight NPBI system that handles up to 2,400 CFM of 6 tons. Designed for multiple mounting options including fan inlet, interior duct walls or floors. The composite construction allows for mounting in corrosive environments.
Features:
- > 300 Million + and – Ions/cc/sec
- Universal Voltage Input from 24VAC to 240 VAC
- Programmable Auto-Cleaning Cycle
- Carbon Fiber Brush Emitters
- Alarm Contacts
GPS-FC48-AC™
Compact Auto-Cleaning Ionization System
Auto-cleaning, lightweight NPBI systems that handles up to 4,800 CFM or 12 tons. Designed for multiple mounting options including fan inlet, interior duct walls or floors. The composite construction allows for mounting in corrosive environments.
Features:
- Universal Voltage Input from 24VAC to 240VAC
- > 400 Million + and – Ions/cc/sec
- Programmable Auto-cleaning Cycle
- Carbon Fiber Brush Emitters
- Alarm Contacts
GPS-DM48-AC™
Auto-Cleaning Needlepoint Bipolar Ionization Air Purification Device
The world’s first auto-cleaning, lightweight duct-mounted NPBI electronic air cleaner. The maintenance free unit is designed for indoor or outdoor duct mounting and can handle up to 4,800 CFM or 12 tons.
Features:
- Universal Voltage Input from 24VAC to 240VAC
- > 400 Million + and – Ions/cc/sec
- Programmable Auto-cleaning Cycle
- Carbon Fiber Brush Emitters
- Alarm Contacts
- 3/4 Quick Turn Duct Adapter
- 6’ of Watertight Flexible Conduit
GPS-iRIB-18/36 ™
The First Flexible Ion Bar Air Purification Device
The GPS-iRIB is available in 18” and 36” lengths. They are made from a flexible chemical, heat and cold resistant Kapton® material containing a circuit with special carbon fiber ion emitters soldered into the circuit traces. This mechanism is engineered to deliver the highest level of ionization with the least amount of energy in the most compact size. Designed for 3200 CFM or 8 tons.
Features:
- > 35 Million + and - Ions/cc/sec per Foot
- Fold-To-Length Circuit
- Local LED Power Indication
- Integral Control Relay for BAS Interface
- Velcro® for Easy Installation
GPS iMEASURE-D™
NEW PRODUCT
The GPS-iMEASURE-D ion detector is permanently mounted in the duct downstream of any GPS ionization device. It measures ion levels in real time and reports back to a BAS. It includes three sensitivity levels: 20,000/200,000/2,000,000 ions/cc/sec, that can be set based on the application and in-duct location.
Features:
Monitor In-duct Ionization Levels
20,000 to 2M ions/cc/sec
Input Voltage 12 to 24V AC or DC
LED Operation Status
The GPS iMeasure is the first commercially available ion detector that can be permanently mounted in the space to measure ion levels in real time and report back to a BMS.
Features:
- Auto Calibration
- Auto Zero
- 0-10VDC Output for BAS Monitoring 24/7
- Watchdog Timer
- Bi-color LED
- 0-1,000,000 ions/cc Range
You must be logged in to post a comment.